ESP32 Addon Board Kit Wifi Backpack with a 3D Printed Case for Flipper Zero
54
Direct purchase from the factory 
Idaniloju sisan
Ẹbun ọfẹ
Ilana gbigbe
Ilana padaẸbun Ọfẹ
Kaabọ si Roymall, oju opo wẹ ẹbun rẹ. A dupẹ lọwọ rẹ, a si pese ẹbun ọfẹ pẹlu eyikeyi rira. Ṣetan lati ṣawari akojo wa? Yẹra ni koko wa, fi aṣẹ rẹ sii, ki o si gba ẹbun ọfẹ rẹ.Ilana Gbigbe
A nṣe awọn aṣẹ laarin ọjọ 2.Gbigbe deede jẹ ọjọ 5-7.Akoko gbigbe le yatọ da lori ibudo.1. Ilana Pada
A gba nikan awọn nkan ti a ra lati roymall.com. Awọn ẹbun ọfẹ ko le pada. Nkan gbọdọ jẹ ailohunsi ati ni apoti atilẹba.A nṣe awọn pada laarin ọjọ 3-5 lẹhin gbigba.Awọn nkan aṣa ko le pada.Kan si wa: service@roymall.com tabi Whatsapp: +86193598494712.Ilana Isanwo
Iwọ yoo gba isanwo lẹhin gbigba nkan. A ko san owo gbigbe pada.Kan si wa: service@roymall.com tabi Whatsapp: +8619359849471
Description:
1. This is an addon board for the Flipper Zero multitool, providing Wifi functionality in a uniquily compact and covert formfactor. All kits are delivered with a 3D printed case using black PETG.
2. What makes it special: It comes in a unique "backpack" formfactor, hugging the Flipper snugly, fitting neatly in your pocket during operation. It also has a Micro-SD card slot to save captures or whatever else you can come up with.
3. Other than that it behaves like the FlipperZero wifi debugger module and all guides fitting that board also apply to this kit.
4. You can using an external antenna jack. (The external antenna one has the antenna connector fitted to the chip as well as a small jumper set) and the supplied 3D printed case. (The external antenna one obviously includes an antenna connector)
5. This project has a specific jumper set as well as a tiny antenna jack mounted on the board.
Note: This product does not include for Flipper Zero
Depending on the batch, the appearance of the electronic components on the board may be different from the picture, but the functions are the same and do not affect use.
Specifications:
Material: PCB+Electronic Components+PETG
Colour: Black
Package Contents:
1x Wifi Backpack - ESP32 Kit
1x 3D printed case
1x Wifi antennauff08Optional)
1. This is an addon board for the Flipper Zero multitool, providing Wifi functionality in a uniquily compact and covert formfactor. All kits are delivered with a 3D printed case using black PETG.
2. What makes it special: It comes in a unique "backpack" formfactor, hugging the Flipper snugly, fitting neatly in your pocket during operation. It also has a Micro-SD card slot to save captures or whatever else you can come up with.
3. Other than that it behaves like the FlipperZero wifi debugger module and all guides fitting that board also apply to this kit.
4. You can using an external antenna jack. (The external antenna one has the antenna connector fitted to the chip as well as a small jumper set) and the supplied 3D printed case. (The external antenna one obviously includes an antenna connector)
5. This project has a specific jumper set as well as a tiny antenna jack mounted on the board.
Note: This product does not include for Flipper Zero
Depending on the batch, the appearance of the electronic components on the board may be different from the picture, but the functions are the same and do not affect use.
Specifications:
Material: PCB+Electronic Components+PETG
Colour: Black
Package Contents:
1x Wifi Backpack - ESP32 Kit
1x 3D printed case
1x Wifi antennauff08Optional)
(The FlipperZero is not includes)
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
